Our products and service

External Weather Louvre's

May be used as an air intake or exhaust unit mounted on external surfaces. A perimeter angle frame encloses louvre blades set at 45 degrees and overlapped on 40mm pitch centre. A birdmesh screen is mounted to the rear of the louvre
(other types of screen available on request).

Linear Bar Grilles

These are suitable for supply or extract applications. They can be mounted in ceilings, sidewalls, sills or bulkheads with or without perimeter frames and can be used as individual units or in continuous form. A heavy duty grille is also available.
When fitted with opposed blade dampers at the rear they become linear bar registers.

Eggcrate Grilles

Designed for extract/transfer systems and are suitable for sidewall and ceiling mounting.
When fitted with opposed blade dampers at the rear they become eggcrate registers.

Double Deflection Grilles

Suitable for duct, sidewall or ceiling applications. The two sets of vanes are individually adjustable allowing air deflection to be set on site.
When fitted with opposed blade dampers at the rear they become double deflection registers.

Single Deflection Grilles

Suitable for duct, sidewall or ceiling applications. Grille vanes are individually adjustable allowing air deflection to be set on site,
When fitted with an opposed blade damper they become single deflection registers.

Pressed Steel Grilles

Used for extract or air transfer, suitable for sidewall, partition or door application.
The grille face is horizontal and unidirectional.

Non Vision Grilles

Non vision grilles that allow air transfer between adjacent areas whilst remaining vision proof. They are suitable for mounting in doors, partitions and walls and are supplied with rear telescopic frames for matching front and rear borders. With minor modification these will prevent light transfer and in this mode are ideally suitable for dark room applications.
The grille face is horizontal and unidirectional.

Dampers

Our comprehensive range of opposed blade dampers in extruded aluminium includes light and heavy duty units for independent mounting.